LTO验厂环境方面要求

 Environment
LTO验厂对环境方面审核标准
1. Environment- Greenhouse Gases
   环境-温室气体
1.1 Emissions of the six Greenhouse Gases (GHGs) shall be measured and managed
   应对 6 种温室气体（GHG）的排放进行测量和管理
1.2 Opportunities for reduction of GHGs shall be identified
   应确认可减少温室气体的可能性
2. Environment- Energy
   环境-能源
2.1 Energy use shall be measured and managed
   应对能源使用进行测量与管理
2.2 Energy reduction targets shall be set
   应设立能耗减少的目标
3. Environment- Waste Management
   环境-废弃物管理
3.1 Waste shall be measured and managed
   应对废弃物进行测量与管理
3.2 Waste Reduction Targets shall be set
   应设立废弃物减少目标
3.3 Where reuse or recycling is not feasible, wastes shall be disposed of responsibly
   应当在无法再利用或再循环的情况下负责任地妥善处理废弃物
3.4 Local authority Approved or Licensed waste disposal shall be used
   应采取当地政府核准或许可的废弃物处理方式
3.5 Additional controls shall be in place for hazardous waste.
   对于危险废弃物应执行更多的管控措施
4. Environment- Effluent
   环境-废水
4.1 Effluent discharges measured and maintained
   应对废水排放进行测量与设施保养
4.2 the location shall understand the contribution of their effluent load downstream
   各区域应理解其废水对下游的影响
4.3 Effluent discharges shall be controlled
   应对废水排放进行控制
4.5 The potential for spills shall be risk assessed
   应对泄漏的可能性进行风险评估
4.6 Locations shall develop and maintain an effluent action plan
   各区域应制定并维护废水处理行动方案
5.Environment - Hazardous Substances
   环境-危险物质
5.1 The storage facilities for hazardous substances shall be designed to prevent and contain spills
   危险物质储存设备的设计应能够预防泄漏并控制泄漏范围
5.2 Storage in underground tanks shall be avoided.
   应避免储存于地下槽罐中
5.3 The integrity of pipework shall be confirmed
   应确认管道系统的完整性
5.4 Appropriate emergency procedures shall be identified for areas where hazardous substances
   危险物质储存区域应确立适当的紧急对应措施
5.5 PCBs contained in electrical and hydraulic equipment shall be eliminated
   应避免使用含有多氯化联(二)苯的电气及液压设备
5.6 Ozone-depleting substances (ODS) (definition) shall be controlled
   应对破坏臭氧层的物质（ODS）（定义）进行控制
5.7 Ionising Radiation sources (definition) shall be controlled
   应对电离辐射源（定义）进行控制